Before you begin

This online configurator creates areas of gradient stiffness by post-processing the initial G-code, for 3D printing TPU foot orthoses. It is an assistive tool for professionals and does not replace clinical judgment or physical verification of the result.

• Read the Help section (or other resources provided) before first use, so you understand exactly what each function does.
• Always test physically — print and verify the result.
• The user assumes full responsibility for verifying, testing, and validating the results obtained with this tool.
• For the correct design of the gradient stiffness areas, your operating system's display Scale must be set to 100% (Windows: Settings → System → Display → Scale). At other scale values (125%, 150%…), drawn zones can be misplaced relative to the model.
• Your files (3MF, gcode, jpg/png/bmp footprint) are processed temporarily, exclusively in server memory, for as long as it takes to generate the result. They are not saved, stored, or copied to any server or external medium — neither by us, nor by third parties.

Something went wrong

An unexpected error occurred. Please describe below what you were doing (optional), then send the report — attach your .gcode/.3mf file too if the issue involves them.

If you have an email app installed on this device (like Outlook or Mail) or a webmail service set as your default (like Gmail), then "Send by email" opens it, addressed to PedorthicArt@gmail.com, with this report already filled in. If nothing happens when you click it, that just means no default email app is set up on this device — use "Copy instead" above and paste the report into an email yourself, sent to that same address.